Traffic lights The page design

Layout design (1) should correctly handle the relationship between color, text, arrows, numbers, graphics and frame, make the logo layout is reflective road studs‍ clear, beautiful;

(2) the same traffic signs shall use the same type of signs;

(3) gantry sign each traffic sign plate is uniform height, unified frame specifications.

6 GB

Traffic signs with colors, shapes, symbols shall be in accordance with the "road traffic signs and markings" (GB5768) regulations.

The arrow provisions

The correct direction of travel using the solar road stud‍ arrow on the sign to a certain angle to reflect the vehicle.

(1) Portal Framed sign or overpass attached to mark the arrow, used to indicate lane use or travel destination, the arrow downward, and points to the center line of the lane; used to indicate the direction of the arrow exports, should be tilted upward, tilt angle should be linear can reflect the exit lane.

(2) the roadside installation guide sign, said straight toward the direction of the arrow must point to the above said, turning toward the direction of the arrow should be consistent with the linear turning lane. The three arrows and Xiang Zuo, right at the same time, to the right of the arrow should be placed in the right direction, left arrow, should be placed in the left most.

(3) below the arrow can be placed in beacon warning light‍ the appropriate part of the main text, or text side.