Led barricade lights installation matters as follows

1 for the stack or other similar nature of the building, the top of the LED barricade lights must be led barricade lights  in the top 1.5-3 meters between, considering the chimney to lighting pollution, obstacle lamp can be installed below the chimney mouth 4-6 meter parts. 2 no matter what kind of obstacle lights, in different obstacle lamp number and arrangement of height, should can see the object or objects contour from all directions, and consider the synchronous flashing obstacle lights, in order to achieve obvious warning effect. 3 the obstacles obstacles lights settings should mark out the highest point of the battery powered warning lights  and the edge. 4 shape the majority of buildings set obstacle lights should be able to see the outline of objects from each aspect, the horizontal direction can also be a reference to the distance of 45 meters set obstacle lamp. 5 to 105 meters of super high objects, facilities or guyed tower, tower and so on, should be in the top end is provided in the light intensity A type obstacle lights, and white flash, set the intensity of type B red obstacles to its lower strata lamp. 6 higher than the extra object industrial warning light  should be high intensity A type obstacle lamp is arranged at the top end, and should be based on high intensity, obstacle lamp with the use of. Therefore, the general installation method with aviation obstacle light strict requirements for this, in the relevant system of the state have indicated that, in order to installation method to master air bulbs make everyone better, above is my 6 methods you again explain, hope to help people work installed!

Solar barricade lights installation design in tall building standards

Everybody for some applications of solar barricade lights should understand it! Either performance or in use effect, obstacle lamp is a real landmark objects, exactly said that is light, particularly at barricade flashing light  or when it's rainy weather, can give direction in aviation, erected in the high-rise building, the general construction should be installed in the obstacle lamp the top. The purpose of setting: In solar powered traffic sign  buildings to install solar barricade lights signs indicative of can be effective for aircraft to play the role of warning. General in the upper end of the edge of the high-rise building or. Setting method: When solar barricade lights actually set in high-rise buildings is a set standard, need to Safety Beacon Warning Light into account some factors surrounding, the other is from every angle to see objects, is the horizontal direction, can refer to the distance between 45 meters set obstacle lamp, general building should be installed in the obstacle lamp the top.

Traffic barricade light installation design in tall building standards

Everybody for some applications of traffic barricade light should understand it! Either performance or in use effect, solar traffic barricade light  lamp is a real landmark objects, exactly said that is light, particularly at night or when it's rainy weather, can give direction in aviation, erected in the high-rise building, the general construction should be installed in the obstacle lamp the top. The purpose of setting: In barricade warning light  buildings to install traffic barricade light signs indicative of can be effective for aircraft to play the role of warning. General in the upper end of the edge of the high-rise building or. Setting method: When traffic barricade light actually set in high-rise buildings is a set standard, need to take into account some factors surrounding, the other is from every beacon warning light  to see objects, is the horizontal direction, can refer to distance of 45 meters set obstacle lights, general building should be installed in the obstacle lamp the top.

With layout step barricade lights LED

Led barricade lights is widely used in high-rise buildings, airports, television, communication tower, power tower, power plant chimney edifices, obstacle lamp lights can be led barricade lights  into: low light intensity, light intensity and high intensity of 3, not only can provide the correct direction for the night air route running, but also to beautify the night landscape effect, when installed, building facilities must be greater than 45 meters, can also be used in conjunction with other marker lamp.
The reasonable layout of LED barricade lights:
Mark 1 must clear out the highest point of the obstacles and the edge set obstacle lights, middle layer spacing must not be more than 45 meters, the city Zhongbai meters high solar barricade lights  with particular consideration of the middle layer and barrier.
Intensity of 2 <150 m high barriers for high-voltage transmission cable, tower can be set to white at the top of the marker lamp.
Installation location should not be 3.led barricade lights more than 45 meters, for the chimney or other similar nature of the building, the top obstacle lights should be located in the top 1.5-3 meters between, considering the chimney to lamps and lanterns pollution, obstacle lights can be in below the chimney mouth 4-6 meters position.
4 higher than the extra object 150 meters shall, in high light intensity obstacle lights with the use of.
The above simple for everyone to share the installation position and the installation method of aviation warning signal light  light concrete, the other is obstruction light concrete application range, no matter what kind of obstacle lights, the installation quantity and specific installation methods are finally specific requirements, installation, need to remind people: the need for all can see the object or "the outline of object group" from various aspects, and consider the LED barricade lights at the same time and sequence of flashing, in order to achieve obvious warning effect.

What are the main characteristics of solar barricade lights

There are many kinds of solar barricade lights, obstacle lights of different kinds of its performance is different, may all of these are not very understanding, but barricade light  have a common property is used for lighting, ha ha! Today mainly to introduce what are the characteristics of aviation obstacle lamp. 1 level light distribution characteristic is good Standard optical properties is what mean? Experts said, the light distribution index is mainly used to curve, it can be seen from the graph lighting peak line directly, also can accurately calculate the peak percentage by coordinate value. Professionals said, under normal circumstances, the peak and valley values closer to the level of solar barricade lights  distribution, the better the performance. Aviation obstacle light level with excellent optical characteristics, the peak valley values were generally within 10%. 2 can drive circuit using advanced The actual application of the solar barricade lights requirements are very strict, it must have a high conversion efficiency of the circuit. Like solar barricade lights with self detection circuit and with standard computer port intelligent control circuit, which can easily access all kinds of telemetry and telecontrol system or system etc.. The 3 has a high photo electric conversion efficiency In the same power, divergence angle condition, the higher the value of the Beacon strobe light  intensity, light / electricity conversion efficiency is high, the use of more power. Improve in many ways, photo electric conversion efficiency, but mainly is to design a reasonable control and power drive circuit. 4 has the advantages of good protective properties Obstruction light due to dispense with traditional mechanical moving parts bubble instrument, can make the whole lamp watertight structure. The watertight structure, even if the solar barricade lights immersed in water, in addition to outside the normal work but also by non contact mode to realize remote monitoring.

Traffic barricade light has a use matters and attention widely in daily life

Traffic barricade light is generally divided into low light intensity, light intensity and high intensity three, obstacle lights vertical and horizontal distance more than 45 meters of buildings and facilities, three kinds of obstacle lights can cooperate with each other. From the ground 90 meters above the building and facilities: use led traffic barricade lights  intensity obstacle lights red flash, flash frequency should be in 20-60 times per minute, the effective intensity of flash of not less than 1600cd; or the use of high intensity disturbance red lights, the flash effect more obvious. From the ground 150 meters above the building and facilities, the use of high intensity obstacle lights and must be white flash, flash frequency should be in 20-70 times per minute, the effective intensity varies with the background brightness. Traffic barricade light, light-emitting diode, is a solid semiconductor light emitting device, it is used as beacon warning light  emitting materials by solid semiconductor chip, when the two ends together with the forward voltage, carriers in semiconductor compound induced photon emission and produce light. Aviation obstacle lamp can emit red, yellow, blue, green, green, orange, purple, white light. The light source adopts 7 pipe long-life navigation special tungsten halogen lamp tube. And in the lamp circuit and control software is preset, soft start of the luminous mode. Solar panels are encapsulated in the toughened glass, life of up to 20 years; by the composition of the ultra high brightness light-emitting diode lamp posts are encapsulated in the red prismatic polycarbonate lampshade, the light can be reflected by the prism cover, brightness increased more than 2 times. Battery package in sealed plastic steel, moisture-proof, waterproof. Traffic barricade light advantages: the intrinsic characteristics of aviation obstacle lights determines that it is the most ideal light source to replace the traditional, it has a wide range of uses. Small volume, aviation obstacle lamp basically is a small chip is encapsulated in epoxy resin inside, so it is very small, very light. The lamp is started, by a low current in flash voltage increases slowly. Then turn to low current quenching process. The solar battery to charge the battery, the night of automatic opening and closing, flash frequency: 0~65 times / minutes. The battery voltage is 12V. Products with high brightness, wide range of use. Low power consumption, traffic barricade light and power consumption is very low, generally the working voltage of aviation obstacle light is 2-3.6V, the working current is 0.02-0.03A. That is to say: it consumes power does not exceed 0.1W. The lamp holder adopts aluminum alloy casting made. Waterproof corrosion. The installation is convenient and firm. Usage: apply to the height of 45 meters and 90 meters between the city high-rise buildings. The chimney. The Eiffel Tower as a navigation mark lamp. Also with the GZ-155 type (GZ-90 type) with the use of aviation obstacle light. The power of aviation obstacle lights and solar aviation obstacle lights, can be installed in the outdoor, high-rise building, the tower is not easy to supply places. Products have high, medium, low light intensity of various products. Xenon lamp aviation obstacle light can also be customized for users in super high intensity, used in airports, sea. The lamp body is made of long life and high brightness LED light source. The optically controlled automatic control, automatic opening night or foggy weather, close automatically in the daytime, strong reliability, flash cycle can be set according to needs. With anti shock, anti lightning, resistant to sunlight, anti rain and snow, can resist typhoons, hail and other severe weather. Traffic barricade Solar Traffic Sign  distribution of the obstacles obstacles lights settings should mark out the highest point of the obstacles and the edge (that is regarded as high and wide) obstacle lights, middle layer spacing must be less than 45 meters, the city Zhongbai meters high buildings with particular consideration of interlayer added obstacles marker the vertical and horizontal distance of not more than 45 meters (lamp: if the object is the ground more than 45 meters, must be in its middle and hinder marker lamp) for the chimney or other similar nature of the building, the top obstacle lights should be located in the top 1.5-3 meters between, considering the chimney to light pollution, traffic barricade light can be in below the chimney mouth 4-6 meters position. More than 150 meters high objects should be in high intensity, warning signal light  with the use of. The intensity of high voltage transmission cable, disorder of less than 150 meters high tower can be white at the top of the marker lamp. No matter what kind of obstacle lights, the obstacles of different height marker number and arrangement, should can see the object or objects "contour" from various aspects, and consider the traffic barricade light at the same time and sequence of flashing, in order to achieve obvious warning effect.

Using the method of LED barricade lights

Led barricade lights is a red safe light or flashing, to mark the obstacle of potentially hazardous to aviation, such as tower (Telecom, GSM, microwave & TV), crane, chimney, buildings, stadiums led barricade lights ,  high voltage transmission tower. No external power supply, high efficiency silicon solar panels, with its high efficiency by low temperature maintenance free battery power supply system, can guarantee the continuous rainy days to normal work 20 days. The lampshade is made of transparent material, the shell is made of casting aluminum alloy, watertight structure. The lamp body is made of long life and high brightness LED light source. The optically controlled automatic control, automatic opening night or foggy weather, close automatically in the daytime, strong reliability, flash cycle can be set according to needs. With anti shock, anti lightning, resistant to sunlight, anti rain and snow, can resist typhoons, solar traffic barricade light  and other severe weather. Three, installation size The lamp is divided into platform mounted and side mounted two fixation methods, can be arranged on the platform, but also can be installed in the lightning arrester. 1, the platform installation method: consists of a soleplate 4 holes, and fixed with M10X40 bolts, installation structure diagram figure. 2, side installation methods: lamp installed directly lightning arrester cylindrical object, composed of two 10 round clip fixed. Four, the use of methods 1, before the installation and use, will switch to the on position. When installing the rectangular solar plate facing the sun, the LED barricade lights in full to receive sunlight. 2, if the solar aviation obstacle lamp does not light or revolving warning light  is weak, the solar aviation obstacle lamp exposure in the sun can shine 4 hours. 3, if stored for a long time, the LED barricade lights should be placed in dry sub humid place, every three months will be solar aviation obstacle lights out irradiation for three days in the sun. Led barricade lights is mainly used for high reliability applications, such as airport, route tower and tower high-rise building. The lamp is mainly composed of two completely independent consists of a main and a spare two aviation obstacle lights, usually the main aviation obstacle lights shining at night, when the main lamp is damaged backup led barricade lights automatically starts to flash. The aviation obstruction lamp equipped with 25W solar polar 12V.48AH maintenance free battery, aviation obstacle lights can ensure the continuous rain 20 days work.