Led barricade lights installation matters as follows

1 for the stack or other similar nature of the building, the top of the LED barricade lights must be led barricade lights  in the top 1.5-3 meters between, considering the chimney to lighting pollution, obstacle lamp can be installed below the chimney mouth 4-6 meter parts. 2 no matter what kind of obstacle lights, in different obstacle lamp number and arrangement of height, should can see the object or objects contour from all directions, and consider the synchronous flashing obstacle lights, in order to achieve obvious warning effect. 3 the obstacles obstacles lights settings should mark out the highest point of the battery powered warning lights  and the edge. 4 shape the majority of buildings set obstacle lights should be able to see the outline of objects from each aspect, the horizontal direction can also be a reference to the distance of 45 meters set obstacle lamp. 5 to 105 meters of super high objects, facilities or guyed tower, tower and so on, should be in the top end is provided in the light intensity A type obstacle lights, and white flash, set the intensity of type B red obstacles to its lower strata lamp. 6 higher than the extra object industrial warning light  should be high intensity A type obstacle lamp is arranged at the top end, and should be based on high intensity, obstacle lamp with the use of. Therefore, the general installation method with aviation obstacle light strict requirements for this, in the relevant system of the state have indicated that, in order to installation method to master air bulbs make everyone better, above is my 6 methods you again explain, hope to help people work installed!