Matters solar barricade lights and pay attention to the use of

solar barricade lights are generally divided into low light intensity, light intensity and high intensity three, vertical and horizontal light barriers mark a distance greater than solar power beacon light  building and its facilities can be three obstacle lights can be used in conjunction with each other. 90 m above ground buildings and facilities: the use of intensity obstacle lights red flash, flash frequency should be between 20-60 times per minute, effective light flash intensity is not less than 1600cd; or use the red high-intensity obstacle lights, make flash effect more pronounced. 150 meters above ground buildings and facilities, beacon strobe light the use of high intensity solar barricade lights and must be white flash, flash frequency should be between 20-70 times per minute, effective with the brightness of the background light intensity may be. solar barricade lights, i.e. light emitting diode is a semiconductor light-emitting solid device, it is the use of solid semiconductor chip as the light emitting material, when the ends with a positive voltage in the semiconductor due to the carrier recombination generates light photon emission. solar barricade lights can emit red, yellow, blue, green, blue, orange, purple, white light. Source selected seven long life buoy special tungsten halogen tube and Safety Warning Light  circuit control software presets, the addition of soft-start light way. Solar panels enclosed in glass, the life expectancy of up to 20 years; lamppost by ultra-high brightness light-emitting diodes are encapsulated within the red prismatic polycarbonate shade, light reflected through the prism lampshade on its brightness enhancement more than 2 times. Battery packaged in a fully enclosed spray steel sheet, moisture, water.