led barricade lights The compressive properties of Road safety studs

If the Road safety studs could not withstand the pressure, in the car rolled or after impact is easy to break, naturally can not work normally, so compression is a basic condition for Road traffic signs‍ the normal work of the Road safety studs. But the problem is that solar energy spike itself is an electronic products, including electronic part led barricade lights, electronic part to make the compressive performance also has a higher degree of it is not an easy thing, so the compressive properties of general solar spike than conventional spike worse. The current requirements of Ministry of communications technology is 10 tons.

The effective method to improve the compressive properties of Road safety studs are as follows: one is the solar battery board is exposed outside using PC bulletproof materials, to enhance the electronic part of the compression ability; two is possible using the IC control, in order to reduce the volume of electronic circuit, led solar warning light‍ electronic parts to reduce the pressure; three is to design some strengthening ribs on the shell, to share the electronic part of the pressure bearing.

led barricade lights The working principle of Road safety studs

The daytime solar panels absorb sunlight, converts solar energy into electric energy, stored in the energy storage device (a battery or capacitor), in the evening, energy storage solar warning light‍ devices in the electric energy into light (automatic control through photoelectric switch), to draw the outline of road profile by LED light led barricade lights, induced by the sight of the driver.

Road safety studs according to the installation position can be divided into different embedding and projection type.

The former is generally used in the midline, which are generally used for edge line. This is because the installation in the midline of the solar energy spike on compressive performance requirements are particularly high, in order to solve this problem, but the solar energy spike embedded into the ground, only 5 mm above the ground. In the edge lines of solar energy spike for very high compression performance requirements is not above ground, still can effectively work.

Road safety studs according to the different storage devices can be divided into capacitance and cell type, the service life of up to five to seven years, the service life is generally one to three years.

Because the embedded type solar energy spike great solar powered warning light‍ damage on the pavement, and capacitance type solar energy spike cost is too high, so most of the current application or convex type battery solar spike.

Stars solar barricade lights Cat eye reflective road stud features

High brightness

Common reflecting spike reflective brightness of only 300-400 MCD, cat eye reflective road stud brightness can reach 2000 MCD or more, is 6-7 times of the former, high intensity led traffic barricade lights‍ of light at night through the rain and fog, safely and effectively for the driver direction.

Active luminous, dynamic warning stars solar barricade lights.‍

Cat eye reflective road stud flashes at a certain frequency in the evening, while the human vision more sensitive to change, so its dynamic warning role is very strong. Active lighting can not only avoid the interference of rain and fog, but also from dependence on the car lights, viewing distance, better.Cat eye reflective road solar powered warning light‍ stud in rainy and foggy weather and in the corners, along road profile induced by the driver's line of sight and eliminate the safety hidden trouble has played a very important role.

traffic barricade light Cast aluminium road studs installation method

1 placed in isolation facilities installation safety, it is heavy, hope everybody must not be ignored, but in the whole process of dynamic construction, cast aluminium road studs battery traffic light‍ whether new roads traffic barricade light, or the traffic road, everyone should be in safety facilities, such as construction in traffic, security personnel with the installation staff ratio should be 1:1. Not open to traffic road construction, security personnel with the installation personnel proportion should be 1:3.

2 apply glue evenly on the spike.

3 cast aluminium road studs firmly in the installation position, ensure that the correct direction, if the glue more, be sure to clean up;

4 if cast aluminum with feet spike, to ensure that the red beacon light‍ hole depth is greater than the nail feet depth 1cm, hole diameter is larger than the nail feet diameter 2mm.

Stars solar barricade lights The use of flashing traffic baton

1 press the switch of the lamp, the lamp flash; again press, light conversion constant light; press again, lamp off

2 lamp is provided with a charging socket, stars solar barricade lights‍, traffic barricade light‍ flashing traffic baton only the corresponding charger output plug can be inserted into the charging socket.

The 3 charger built-in charging protection device. When the charger input end connected to power after the insertion of a charging socket of lamp, the indicating lamp is red, start the normal charging; the battery is full of electricity, light turned green.

4 a full charge, can use at any time within one year; if not placed, every six months should be supplementary charging 6 hours is better.

5.flashing traffic baton is in use process, when the single solar warning lights‍ battery is about to run out, the lamp brightness will be weakened sharply, at this time should stop using and charging.

traffic barricade light Represents various color mark is in the range of

(1): red for "stop", "ban into the" sign of the background, prohibition signs the red circle, slash; "the car will be given", "crossing ahead" signs of the arrow; location Safety Beacon Warning‍ recognition mark in the "first aid station" with the red cross national highway numbering; the bottom color; railway fork symbols.

(2): used to indicate the blu‍e logo and general road guide sign color.

(3) used for highway guide sign color.

(4) the yellow. For warning signs color; "highway number" sign, "end of Expressway tips" sign, "slow down" logo color; distance confirm logo "rear end collision danger", "away from the car ahead 200m" logo color; construction mark pattern background.

(5): used for white contrast color color and pattern, auxiliary sign language.

(6) for "warning signs", "auxiliary sign" warning signal light‍ and other part of the logo design, text color contrast.

(7) for tourism logo color: brown.

Road traffic signs and traffic of modern road sign types and the meaning of our main signs and auxiliary signs two major categories of 100.‍

Stars solar barricade lights Geometry and meaning , traffic sign

Traffic sign legibility and display are good and the traffic sign shape has important relationship. In the shape of the same area, good effect and easy identification of the order is: LED Traffic Batons‍ diamond, square, triangle, Pentagon, hexagon, octagon, circle. Provisions on the geometry of the draft international "colors and safety signs" standard is: positive triangle warning: circular said prohibitions and restrictions; square, rectangular said tip; circular pattern with slash, also said the ban. Our traffic signs the provisions of modern geometry international standard and national standard "safety" is consistent.

The triangle. Display degree is high, irrespective of light conditions, than the other shape attract sb.'s attention. Our country uses the three

Angle for warning signs geometry, using inverted triangle in the "parking way" and "slow.".

The circular. Circular display a higher degree, vision, yellow solar flashing warning light‍ also easy to arrange text, our country will round for prohibition and indicating two marks of geometry.

The square. Including rectangular and square, its visibility, for road traffic signs geometry.‍

traffic barricade light The use of traffic road sign in life

Traffic road sign, is to transfer the guide, limit, a Safety Warning Light‍ warning or instruction information of road facilities with words or symbols. Also known as road signs, road traffic signs. Traffic signs in general to the traffic signs in safety, set up eye-catching bright, clear, the implementation of traffic management, is an important measure to guarantee the traffic safety, smooth. There are many types of traffic road sign can be used in various ways, divided into: the main signs and auxiliary sign; the movable markers and fixed signs; lighting signs, luminous LED Traffic Batons‍ signs and reflective signs; variable message signs and reflect the driving environment change.