The following details of solar barricade lights

Solar barricade lights standard: The top 1 high-rise buildings must be located in one or several solar barricade lights, the navigational safety. 2 buildings higher than 45 meters barricade flashing light  the surrounding ground must be in the middle layer of additional obstacle lights, with low intensity, between the obstacle lamp distance must be less than 45 meters. More than 3 high buildings 150 meters, Solar Warning Light  the top must be set high intensity of solar barricade lights, and in the light barrier lamp used in combination to show its existence.

General traffic barricade light introduction and use

Traffic barricade light! And the ordinary lamps are not the same, the material is power supply system by imports efficient battery plate, led traffic barricade lights  free accumulator, running through the low power consumption control circuit, charge during the day, night shining, ensure the safety of maritime, air navigation, guidance, and ensure the battery can work in normal state, obstacle lamp used for a long time normally, can work in harsh environments. Traffic barricade light is a kind of red safe light or flashing, is mainly used to obstacle guiding potentially industrial warning light  to aviation, no external power supply, a high-efficiency silicon panels, specially configured for high efficiency and low temperature maintenance free battery power supply system, and can ensure the continuous rainy days to normal work 20 days. Method of use: 1 in the long time preservation, staff need to obstacle lights placed in dry place, from time to time, required maintenance time. 2 before the installation and use, will switch to the on position. 3 if traffic barricade light lamp does not light or light is weak, the solar aviation obstacle lamp exposure in the sun can shine 4 hours. solar power beacon light  the methods and properties of the above traffic barricade light, to make up the difference with the ordinary lamp, lantern is not long on but ablaze, the other is mounted on the highest point of the building and the edge, no matter what kind of obstacle lamp types, staff need to use at the installation when considering obstacle lights at the same time and sequence flicker, in order to achieve obvious warning effect.

The reasonable layout of LED barricade lights

1.led barricade lights must clear out the highest point of the obstacles and the edge set obstacle lights, led barricade lights  layer spacing must be less than 45 meters, the city Zhongbai meters high buildings especially considering the intermediate layer and barrier.
Intensity of 2 <150 m tall obstacles for high-voltage transmission cable, tower can be white at the led warning light  of the marker lamp.
Installation location should not be 3.led barricade lights more than 45 meters, the chimney or other similar nature of the building, the top obstacle lights should be located in the top 1.5-3 meters between, considering the chimney to light pollution, obstacle lights position can be located below the chimney mouth 4-6 meters.
4.led barricade lights should be led strobe beacon warning light  than the extra object 150 meters shall, in high intensity obstacle lights with the use of.

Traffic barricade light description of product components

This product is composed of traffic barricade light components, batteries, controller, a traffic barricade light emitting component. The technical characteristic is: ① has super power, brightness equivalent incandescent lighting, 8 hours a day, in the continuous rain 9 days work; the application of the photoelectric Solar warning light  controller has a charge and discharge protection function, the photosensitive self-control device and control device, so that the product can effectively save energy, increase the effective the lighting time, reduce the production cost; the traffic barricade light unit uses the chip, and the establishment of a global different latitudes in the annual sunshine time data in intelligent controller. Enter the latitude is used in the controller, adjust good year, month, day and on / off time, can have automatic tracking the ambient beacon warning light  in the large area is used, the startup and shutdown time is very small, traffic barricade light so as to better overcome the drawbacks of traditional solar lamp for start jet lag caused by too large.

Technical scheme adopted by lights LED barricade

A LED barricade lights, comprising a mounting frame, solar panels, solar battery box, led barricade lights  lamp, which is characterized in that: the solar battery box installed on the mounting frame, the LED barricade lights is installed in the solar battery box through the screw on the lid of the box, the box cover and the solar battery box beacon strobe light  the lock is fixed, on both sides of the solar battery box are respectively provided with a solar panel mounting ears, and solar battery box in the middle position of the bottom is provided with a fixed pin. Connect the LED barricade lights plate end back through the installation of ear sliding pin shaft and the solar battery box side, back and both sides of the solar panels on the other end of the fixed with an arc-shaped led warning light rail, the solar panels on the two sides of the back arc before and after the slide rail and solar battery box at the bottom of the sliding pin sliding connection, and through the arc-shaped slide rail can be arbitrary adjustment range of solar panels within 90 deg..

General solar barricade lights introduction

Solar barricade lights uses: night construction, dangerous lot, check the attention with repair and construction of parking. Traffic warning signs, such as the use of construction fence. Solar barricade lights Product Description: vertebral road lamp using ultra Safety Beacon Warning Light  emitting diode as light source brightness, accurate to remind the people around Caution. Flicker frequency is high, easy to debate. Intelligent switch, automatic shutdown, automatic night boot flash. Intelligent switch, automatic shutdown, automatic night boot flash. A battery as a power source, convenient carrying, low cost. Waterproof and impact resistance, high brightness LED, enhance road safety, suitable for road command, traffic, and road construction inspection. The warning, the use effect is better with the traffic signal baton  cone. Role to the security warning. Application of solar barricade lights range: solar barricade lights has a waterproof function, can be directly hung in supporting the use of road cone, also can be directly hung on any object, products are mainly used in the high-speed road, bridge, construction sites, mines, slow zones. The product has a flash function, shine at night, thereby * show drivers to slow down.

Led barricade lights's description of goods

Led barricade lights, have red, yellow lamp cover adopts high quality material, waterproof, non fade, anti impact, handle type design can carry, convenient carrying, low cost. The solar traffic barricade light sensitivity in optical light control circuit, under the condition of close automatically in the daytime, night work automatically. Two large battery power supply, high quality LED, energy saving. Apply to roads, traffic barricade light  command, check and road construction and traffic display region , with traffic cones with better results, the safety and effect. Led barricade lights waterproof, do not fade, strong impact resistance, convenient carrying, low cost. ● use For the road, traffic command, check and road construction led barricade lights region. For the road, traffic command, check and traffic wands  construction led barricade lights region. Not suitable for children under three years of age, with small parts, beware of children swallowing. ● instructions ● instructions Join the two large cell can be used.